*The price is for one piece*Dental Orthodontic Lingual Button Bondable Round Base with Mesh 10Pcs/kitRounded edges for patient comfortStainless Steel materialRound flat - 3.5 mm diameterOval flat - 3.88mm x 2.88mmOrigin: China
A NiTi closed coil spring is an orthodontic passive compressed spring made of super elastic Nickel Titanium. To facilitate its application, two round eyelets are attached to each side of the coil. It is an important element in every orthodontic office. Unlike SS closed coils, NiTi closed coils will better resist deformation under normal activation. IOSmanufactures the coils in various length to accommodate the different needs by orthodontist. . All IOS NiTi coils are manufactured from super elastic NiTi
Bondable to cuspids impacted palatally or labially.
The traction chain swings freely within the eyelet. It can be cut easily to achieve the desired length.
The traction chain can be tied to the archwire with elastic thread or tubing to provide traction in the desired direction.
Safer for Nickel Sensitive Patients
The potential for allergic reaction is minimized with a plating of 24 karat gold,which helps to limit the amount of nickel ions that can be released into the oral environment.
Bite Turbos are small composite platforms placed on the inside of the upper front teeth, or on the biting surfaces of the back molars, to prevent full closure of the teeth.
When upper and lower braces are placed at the same time, in many instances, the top teeth bite down and contact the lower braces.
This will cause discomfort to the patient, and will prevent the lower teeth from aligning properly.
To avoid these unfavorable issues, Bite Turbos are placed on the back of the upper front teeth, or on the biting surfaces of the back molars, to act as ramps or speed bumps, to prevent the patient from biting all the way down.
Bite turbos are small metal or acrylic (pink/tooth color) blocks that are placed in the front (anterior bite turbo) or back (posterior bite turbo) of your mouth in order for the teeth to move more rapidly. When the teeth aren't biting together tightly (as they did before braces were placed) they can freely move into the correct position.When upper and lower braces are placed at the same time, in many instances, the top teeth bite down and contact the lower braces This will cause discomfort to the patient, and will prevent the lower teeth from aligning properlyTo avoid these unfavorable issues, Bite Turbos are placed on the back of the upper front teeth, or on the biting surfaces of the back molars, to act as ramps or speed bumps, to prevent the patient from biting all the way down.Origin: China
The open coil spring is a wound spring which is activated by compression and exerts a net 'pushing' force in two directions away from its center. 1 Open coil springs are mainly used for opening spaces to crowding or for the distalization of the molars.
Quick built & Aesthetics Orthodontic Accessories Contains the mould:
1. Lingual Button Injection Mould
2. Bite Turbo Injection Mould
3. Tongue Tamer Injection mould
4. Mini Tube Injection Mould
5. Bracket Injection Mould
6. lingual wire Bondable Injection mould
Operation procedure :
Step 1 Select one of the six mould, mount to the handle elbow and then fill the light curing resin
Step 2 Place the resin-filled handle on the teeth sur of the adhesive accessories you need, with light curing, 10-15 seconds later, pull out the mould and handle. accessories will be attached to the teeth (mould can be reused)
PowerScope 2 brings you simple, efficient, Class II correction like you've never seen before. This latest generation features a stronger wire attachment nut and visual activation indicators. It addresses critical needs of the orthodontist, including patient comfort and acceptance, extensive range of motion, simple installation and much more.* PowerScope 2 goes from package to treatment in just seconds, and unlike other Class II correctors, there's no need for assembly, measuring, or appliance manipulation. This wire-to-wire device delivers unmatched patient comfort, eliminates the need for headgear tubes or special band assemblies, and can be used with either banded or bonded molar tubes.
PowerScope 2 has the ability to treat the following types of cases:
Class II correction with dentoalveolar compensation of occlusion (Class II elastics effect)
