Prosthetics

Made In Egypt

Polishing kits for amalgam and precious alloys

The kits are available in contra angle or friction grip shank and contain all important instruments for all polishing steps up to high gloss.

Contents Cup: 3x Brownie, 2x Greenie, 1x Supergreenie Minipoint: 3x Brownie, 2x Greenie, 1x Supergreenie

The Brownie cups and midi-points are made with a coarse abrasive that is ideal for removing scratches and blemishes from the amalgam surface. The Greenie cups and midi-points are made with a medium abrasive that is used to smooth out the surface and create a polished finish. The Supergreenie cup and midi-point are made with a fine abrasive that is used to create a high gloss finish.

The polishing compounds in the Amalgam Polishing are impregnated into the rubber cups and midi-points. This means that there is no need to add additional polishing powder, which can make the polishing process messy and time-consuming. The polishing compounds are also water-soluble, which makes it easy to clean the instruments after use.

The Amalgam Polishing is a high-quality set of polishing instruments that is ideal for dentists who want to achieve a professional finish on their amalgam restorations. It is easy to use and provides consistent results. The kit is also affordable, making it a great value for the money. 

Porcelain Etch 9% Buffered Hydrofluoric Acid

Waldent Procelain Etch is used to etch porcelain veneers, crowns, bridges, inlays, onlays, and fractured dental porcelain. Etch and a quality bonding resin, yields the highest bond strength to porcelain when compared with other porcelain bonding products.

 Features:-

• Etch is easy to control and place
• Does not stain ceramic or composites
• One-minute etch
• Thixotropic – stays where placed
• Buffered formula
• Washes off easily

 Packaging:-

• 1.2gm x Porcelain Etch

The price is for one Box

Retainer box high quality 

 (1pc)

Made in Egypt

Rubber bowl: A bowl made of soft rubber or plastic used for mixing plaster, stone or investment.

C-Silicone Medium

140ml Medium

Made in Italy

Silaxil condensation silicones (type C), with the highest level of accuracy in details reproduction, are suitable for all impression taking techniques.

The purple color of the light body and the green color of the regular body allow to verify the perfect homogeneity of the mixing between base paste and catalyst, subsequently creating an excellent chromatic contrast between the first and second impression.

The viscosities facilitate manual mixing, making it free of any porosity; they also allow the registration of details without compressing the tissues, thus making it the ideal product for all impression taking techniques. The choice of delicate aromas, mint for Putty and orange for Light and Regular body, is well tolerated by the patient, does not alter the salivation and significantly reduces the emetic effect.

The long working time allows to perform the various stages of impression taking, without that the material pre-harden hastily.

The high dimensional stability over time allows to preserve the impression for long periods without incurring any dimensional alteration of the models.

Furthermore, thanks to the blocks mixture driven, the dosage and subsequent mixing phases of the Light Body / Regular Body with the Enersyl catalyst are extremely simplified, avoiding an unnecessary waste of material.

A color code makes each product easy to identify:

FIRST IMPRESSION:

⬤  Putty

SECOND IMPRESSION:

  Regular body

PACKAGING

 ● Regular body – 1 x 140 ml tube

Advantages

FOR THE SURGERY:

Used with the same length as Oranwash VL, Oranwash L and Thixoflex M on the mixing pad

Total using versatility in the different impression techniques

Easily dispensing

FOR THE LABORATORY:

Versatility

Easily dispensing

Characteristics

Red gel for homogeneous mixing control

Single catalyst for all Zhermack clinical C-silicones (Zetaplus System) -including technical (Zetalabor and Titanium)

Characteristics

• High initial flowability and excellent rigidity after hardening for the putties

• Thixotropy for the washes

• High tear resistance

Advantages

• Excellent relation between rigidity and elasticity

• Ideal working time/setting time ratio

• High flowability and accuracy of wash materials

• Putty and wash materials with the same catalyst (one for Zetaplus System and one for Zetaflow System)

C-Silicones LIGHT

Package contains : 140 ml

Characteristics

• High initial flowability and excellent rigidity after hardening for the putties

• Thixotropy for the washes

• High tear resistance

Advantages

• Excellent relation between rigidity and elasticity

• Ideal working time/setting time ratio

• High flowability and accuracy of wash materials

• Putty and wash materials with the same catalyst (Indurent Gel)